Brief analysis of suspension clamp process standard!

Classification：Company news
author：Dapeng power
release time：2022-01-12
Views：190

Brief analysis of suspension clamp process standard!

【概要描述】

1. The suspension clamp shall consider many application conditions such as bare wire or wrapped protective strip. The clamp shall have a clear use limit in large outlet angle, small outlet angle and allowable angle

2. The curvature radius of hull trunking of ship type suspension clamp shall not be less than 8 times of the diameter of conductor and ground wire, and it shall also have a horizontal axis that can allow the hull to rotate In the process, the level under the unbalanced tension of conductor and ground wire shall also be considered to reduce the wear of hull rotating shaft, avoid the stress concentration or damage between conductor and ground wire, and the wire clamp shall reduce the impact on ground wire and conductor during aeolian vibration,

3. The calculation ratio of grip force and breaking force of fixed suspension clamp on conductor and ground wire shall not be less than the specified value or agreed by the supplier and the buyer; There shall be sufficient contact surface between the clamp and the installation ground wire and conductor to reduce the damage caused by current in case of fault